6-Piece Rectangular 3M Adhesive Replacement Kit for Magnetic Car Phone Mount

Revised Content:

Product Description: 6-Piece Rectangle 3M Sticky Adhesive Replacement Kit for Magnetic Car Dashboard Phone Mount Base

Replacement and Usage Instructions: 1. Clean the base and attach the double-sided 3M adhesive tape. (Avoid applying the replacement sticky adhesive pads on rough, textured, greasy, or leather surfaces) 2. The rectangular adhesive pad has a small tab on the upper right corner, making it easy to tear off and peel away from the red VHB film. Correctly position the base and press the pad firmly a few times to adhere it.

1. (1) Clean and dry the area where the adhesive will be applied. (2) When the tape is adhered, apply even pressure and hold down for 10 to 30 seconds. (3) After application, it is recommended to wait 24 hours before using the mount to allow the adhesive to fully stabilize. The longer the adhesive has time to bond, the stronger the stickiness will be. (Note: The 3M VHB adhesive pad is a single-use item)

Easy Peeling & Usage Tips: The rectangular adhesive pad has a small tab on the upper right corner, making it easy to tear off and peel away from the red VHB film. Position the base correctly, press the pad firmly a few times, and wait 24 hours before using the mount. Ensure the bonding surface is clean and dry for optimal adhesion.

Fits Most Car Dashboard Mounts: The size is 1.89" × 1.1", with a thickness of 0.05". These rectangular 3M adhesive replacement pads fit approximately 95% of magnetic phone car mounts with a rectangular stick-on base, including models from Wizgear, Trainium, Scosche, TACKFORM, Bextrix, PLDHPRO, Ailun, and more.

Instructions for Use: 1. Clean and dry the area where the adhesive will be applied. 2. Apply the tape and press down firmly for 10 to 30 seconds. 3. Wait 24 hours before using the mount to allow the adhesive to fully stabilize. The longer the adhesion time, the stronger the stickiness. (Note: The 3M VHB adhesive pad is a single-use item)

Heat Resistance & Strong Stickiness: The double-sided adhesive pad is a three-layer material. These new mounting tapes use a top 3M VHB super-strong black gel, providing 40% stronger stickiness than the original. They offer high-temperature and low-temperature resistance, making them suitable for use in hot summer conditions when driving a car, truck, vehicle, or Uber in Florida, for example.

High-Bonding Adhesive: The 3M double-sided tape replaces the need for screws, welding, rivets, bolts, fasteners, and other adhesives. It remains stable even on bumpy roads and can actually increase in strength over time. Moreover, it is easy to peel off without leaving any sticky residue.

product information: